Share this content on Facebook!
10 Apr 2012
If you're like most people, you've probably never been in the situation where you are required that will put out a fire employing a Fire Extinguisher Maintenance Irving . That said, you wish to have complete confidence in your fire extinguishers so you realize you can easily up protected inside event of a fire. Basic fire extinguisher care and maintenance requires three steps: a monthly fire extinguisher examination, a yearly professional inspection along with a 12-year hydrotest. Step one: the monthly self-inspection For the monthly self inspection, you don't need any special equipment or training - this can be only a visual inspection. There are a number of things you should have a look at when after a visual inspection of the fire extinguisher: First, make sure your fire extinguishers are simple to see and access, understanding that everyone with your building knows the best way to operate them quickly inside the event of your fire. While doing this, make sure the instruction nameplate is clearly visible and facing outward. Also, confirm the tag for the extinguisher - when it says it's been greater than per year because your last fire extinguisher inspection, call a fire protection company. Check the physical condition of the extinguisher: make sure the pin is intact and is also not held on by tape or wire, that there aren't signs and symptoms of obvious physical damage for the head, body or nozzle, for example dents, cracks, corrosion or leakage and that the nozzle isn't clogged or blocked in almost any way. Check to make sure the arrow for the pressure gauge is pointing toward the green zone. This indicates that the extinguisher is fully charged and can activate properly when used. Considering that the fire extinguisher is usually sealed tight, the only real times the arrow will ever dip down out of the green zone want you've discharged the extinguisher or if it is leaking. Finally, turn the extinguisher up and down about five times. The dry chemical within the fire extinguisher has a tendency to cake, so turning it around can help mix it up. Step two: annual professional inspection This step is simple - just call a fire protection services company. They'll emerge and do basically the identical thing that you are doing every month, nonetheless they write a new tag to state definitively whether your extinguishers are in good shape or not. This might seem unnecessary, however it is really vitally important - if the the fire marshal visits your building and finds untagged extinguishers or extinguishers with expired tags, you may be set for some big fines! Step three: hydrotesting If the extinguisher has managed to make it 12 years without needing to become replaced, you must get it hydrotested. A hydrotest involves charging our bodies of the fire extinguisher with water at test pressure. This will help expose any hidden cracks or weaknesses in the extinguisher body that want to become addressed. Fire Extinguisher Sales Irving


There isn't any comment in this page yet!

Do you want to be the first commenter?

New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: